Slow-dissolving, highly stabilized solid compound suitable for disinfection of ‘bathing water. Effective against bacteria, fungi, viruses and chlorine-sensitive microorganisms. Regulates the pH of water, increasing or decreasing acidity or alkalinity levels. Maintains water pH within the optimal range of 7.2 to 7.6, preventing skin and eye irritation problems and corrosion of equipment. Main features:

• Form: Liquid, easy to dose and distribute.
• Concentration: 14 percent solution.
• Efficacy: Stabilizes the pH of water, improving the effectiveness of disinfectant products.
• Compatibility: Can be used with all types of pools and filtration systems.

MODE OF USE AND DOSAGES:

Measure with suitable instrument the ph of the water and stabilize it between 7.2 and 7.6 using ph Minus or ph Plus. The approximate dosage is 4-6 tablets of 200 grcper 100 m3 of water to be treated on a weekly basis. The product can be dosed by direct introduction into the skimmers or into the appropriate lapping dispensers.In the presence of special circumstances such as heavy influx of swimmers,high temperatures,thunderstorms and other situations that promote easy and rapid dissipation of chlorine,the dose should be increased so as to maintain the residual cholro in the pool at a minimum of 0.5-1ppm.It is still recommended in conjunction, the use of Granular Chlorine in an amount to maintain the chlorine level of at least 1ppm. This itegrative dosage is to be carried out in the evening and in the absence of bathers.These dosages are indicative in nature and can be changed according to the technical characteristics of each individual pool,changing climatic conditions, etc. Methods of use and dosages:

1. pH measurement:
   • Use a test kit to measure the pH of the pool water.
   • The ideal pH should be between 7.2 and 7.6.
2. Addition of pH corrector:
   • Low pH (below 7.2): Add pH corrector to raise the pH.
   • High pH (above 7.6): Add pH corrector to decrease pH.
   • Dosage: Generally, add 0.1 liter of solution for every 10 m³ of water to correct the pH by 0.1 unit. Adjust the dosage according to the results of the pH test and the specific needs of the pool.
3. Product distribution:
   • Slowly pour the solution into the pool, preferably along the edge, with the filtration pump running to ensure even distribution.
   • Wait at least 2-4 hours before taking a new pH measurement to check the effectiveness of the correction.

Recommendations:

• Monitor the pH of the water regularly and adjust the dosage of the pH corrector as needed.
• Carry out pH corrections preferably in the absence of bathers in the pool.
• Store the product in a cool, dry place, out of the reach of children.